Electric Fence insulators are made from plastic or porcelain.There are several styles of insulators, because of the various wire and post type options. Using a good insulator is essential to ensure your electric fence system works properly.
Material: PP and UV prove
Description: Screw dia. 5.3mm,for wire, rope up to 1/2”in width
Material: PP and UV prove galvanized steel zinc coating
Description: for wire, rope up to 1/2”in width
Material: PP and UV prove,zinc coated
Description: For gate connecting
Material:PE,UV stabilised
Description:Insulator designed to be stapled to wooden posts to hold electrified fence wire and removable pin for easy installation or removal of wires.
Suitable for up to 4mm (8ga) wire, polywire or braid
Length: 9cm
Material: PP and UV prove
Description: Used for high tensile rope
Material: PP and UV prove, zinc coating
Description: Wood post staple insulator made to be used with high tensile fences
Material: PP and UV prove
Description: For end of corner post Length:70mm Width:30mm
Material: PP or HDPE and UV prove
Description: Screw dia.8mm ,length:34mm,for wire
Material: PP and UV prove
Description: Fits securely on standard (1-1/4 or 1.33) studded t-post
Material: PP and UV prove
Description: Fits rods and posts from 1/4 to 9/16 inches in diameter
Material: PP and UV prove,iron zinc coating
Description: For Y post use
Material: PP or HDPE and UV prove
N.W.:26g/pcs
Description: Screw dia. 5.3mm,for wire, tape up to 30mm in width
Material: PP and UV prove
Description: For tape up to 40mm
Ridged design enables staple to lock without penetrating insulator profile
Made of non-conductive PE, length 4"
For use at ends and corners, easy to install
Aluminum insert keeps wire from cutting through
Length 50 cm
Made of non-conductive PE
Inner wire hole diameter 4 mm, in coil of 50’
Copyright © 2015. Farmerfits All rights reserved.
